Mixing, Routing & Streaming
Learn how to set up mixes, route audio where you want it and get your audio into your favorite broadcast software.
Understanding and using the routing table on BEACN Mix Create
The routing table included in the BEACN Mixing Suite on BEACN Mix Create and BEACN Mic is a powerful component that allows you to choose where to route your audio. In this article we will break down understanding the routing table and how to best uti
What is a submix?
A submix is a different mix of audio that can be sent somewhere you choose. It can mean that audio has different levels or that audio exists in one mix and not in another. For content creation, this usually means that you'll hear a mix that differs f
How to toggle the personal mix on BEACN Mix Create?
There are 2 ways that you can you can toggle the personal mix on BEACN Mix Create. You can press and hold any of the 4 knobs for 1.5 seconds to toggle between personal mixes. Under the Personal Listening Mix is a little toggle switch that will allow
Using your Audience Mix to set volumes for your audience on BEACN Mix Create
BEACN Mix Create and BEACN Mic (using the BEACN Mixing Suite) gives you the ability to individually manage how you hear your audio sources versus how your audience hears them. This is often referred to as submixing. In this article we are going to wa
How do I setup OBS/Streamlabs Desktop/Stream Elements OBS with BEACN Mix Create?
Setting up BEACN Mix Create in OBS for the first time is really simple. This article is a readable version of the video above. OBS/SLOBS/Stream Elements:. This article uses OBS 28, but these steps work the same in Streamlabs Desktop as well as the St
Setting up BEACN Products in a Dual PC Setup
Setting up a dual PC setup with BEACN hardware can seem difficult! This article is going to simplify the process for you with step by step instructions on our recommended configuration. 2 (two) 3.5mm Auxiliary Audio cables (its important to use a TRS