In this article we will show you how to setup your BEACN Mic Stand

<p>So you just got your BEACN Mic Stand and you are not sure how to set it up? In this article, we will cover how to setup the BEACN Mic Stand using the desk clamp, and we will also cover using the screw in desk mount.</p><h3 id><br></h3><div class="accordion accordion--default"><div class="accordion__item"><div class="accordion__item-title accordion__item-title--active"><strong>Desk clamp method</strong></div><div class="accordion__item-content" style="display: block;"><ol class="list-colored"><li>Open your BEACN Mic Stand Box, and remove the clamp, the arm base, the 3 M5x12 screws, and the 3mm adjustment tool<br><img src="https://attachments.gorgias.help/3dBwk7Wj4Ke2NZ9m/hc/eynJd7OKey79ERow/2024041619-ed0d8207-74c0-4018-9ebc-110a9269ffc3-14%20photos%20added%20(14).jpg" style="width: 300px;" class="fr-fic fr-dib"></li><li>Unscrew the clamp all the way by turning it clockwise<br><img src="https://attachments.gorgias.help/3dBwk7Wj4Ke2NZ9m/hc/eynJd7OKey79ERow/2024041619-697358ac-81e5-4322-bf3f-fbfeabe162f2-14%20photos%20added%20(12).jpg" style="width: 300px;" class="fr-fic fr-dib"></li><li>Using the adjustment tool, mount the arm base to the clamp. Note that you want the tension screw on the arm base to be facing the same direction as the back of the clamp<br><img src="https://attachments.gorgias.help/3dBwk7Wj4Ke2NZ9m/hc/eynJd7OKey79ERow/2024041619-f26c3f32-281c-4865-a1a6-abc46b0b5c37-14%20photos%20added%20(13).jpg" style="width: 300px;" class="fr-fic fr-dib"><img src="https://attachments.gorgias.help/3dBwk7Wj4Ke2NZ9m/hc/eynJd7OKey79ERow/2024041619-450d8f2a-1368-4e5c-afc8-dc621a46399b-14%20photos%20added%20(10).jpg" style="width: 300px;" class="fr-fic fr-dib"></li><li>Take the circular rubber foot out of the box, Peel the white back and place the adhesion side over the screws, being careful to make sure the hole lines up<br><img src="https://attachments.gorgias.help/3dBwk7Wj4Ke2NZ9m/hc/eynJd7OKey79ERow/2024041619-c213c448-154f-4560-923d-5ccfce684332-14%20photos%20added%20(11).jpg" style="width: 300px;" class="fr-fic fr-dib"></li><li>Peel the clear cover off of the circular rubber foot</li><li>Slide the clamp onto your desk, making sure that the back of the clamp makes contact to the desk<br><img src="https://attachments.gorgias.help/3dBwk7Wj4Ke2NZ9m/hc/eynJd7OKey79ERow/2024041619-49622dcc-b861-4b6a-b4c1-d715ab206c61-14%20photos%20added.jpg" style="width: 300px;" class="fr-fic fr-dib"></li><li>Tighten the clamp firmly to the desk by turning the clamp screw until the bottom clamp presses against the desk<br><img src="https://attachments.gorgias.help/3dBwk7Wj4Ke2NZ9m/hc/eynJd7OKey79ERow/2024041619-3b342bbf-0b34-439a-a8d3-187e07580cce-14%20photos%20added%20(3).jpg" style="width: 300px;" class="fr-fic fr-dib"></li><li>Once the clamp is tightened, take the first piece of the BEACN Mic Stand arm piece and slide it into the desk mount. NOTE: BEACN Mic Stand comes with a riser that you can use to bring the arm up higher, but it is not necessary<br><br>With riser:<img src="https://attachments.gorgias.help/3dBwk7Wj4Ke2NZ9m/hc/eynJd7OKey79ERow/2024041619-3b9e9a89-1f27-4288-977e-ad01a269afd2-14%20photos%20added%20(5).jpg" style="width: 300px;" class="fr-fic fr-dib"><br>Without riser:<img src="https://attachments.gorgias.help/3dBwk7Wj4Ke2NZ9m/hc/eynJd7OKey79ERow/2024041619-d5a332b1-3a8f-457b-a549-dac6051b01e8-14%20photos%20added%20(2).jpg" style="width: 300px;" class="fr-fic fr-dib"></li><li>Take the second BEACN Mic Stand arm piece and slide it into the first BEACN Mic Stand arm piece</li><li>Using the adjustment tool, tighten the screws on the desk mount and the first BEACN Mic Stand arm piece to adjust how freely you want the BEACN Mic Stand to move around<br><img src="https://attachments.gorgias.help/3dBwk7Wj4Ke2NZ9m/hc/eynJd7OKey79ERow/2024041619-8e214a60-7088-46ef-838e-0028390472b1-14%20photos%20added%20(4).jpg" style="width: 300px;" class="fr-fic fr-dib"><img src="https://attachments.gorgias.help/3dBwk7Wj4Ke2NZ9m/hc/eynJd7OKey79ERow/2024041619-6e857109-e9b7-4952-baa4-ea5c66b3d481-14%20photos%20added%20(8).jpg" style="width: 300px;" class="fr-fic fr-dib"></li><li>Take the ball mount out of the BEACN Mic Stand Box<br><img src="https://attachments.gorgias.help/3dBwk7Wj4Ke2NZ9m/hc/eynJd7OKey79ERow/2024041619-9c44abeb-2a4a-49c1-8500-9533c18e73d4-14%20photos%20added%20(7).jpg" style="width: 300px;" class="fr-fic fr-dib"></li><li>Loosen the ball mount and slide it on over the BEACN Mic Stand end<br><img src="https://attachments.gorgias.help/3dBwk7Wj4Ke2NZ9m/hc/eynJd7OKey79ERow/2024041619-1102037c-1400-45a2-857b-1e011fe077a7-slideballmounton.gif" style="width: 300px;" class="fr-fic fr-dib"></li><li>Tighten the ball mount<br><img src="https://attachments.gorgias.help/3dBwk7Wj4Ke2NZ9m/hc/eynJd7OKey79ERow/2024041619-cc470a95-1532-4a15-a049-d9c79221caa5-tightenballmount.gif" style="width: 300px;" class="fr-fic fr-dib"></li><li>Once the ball mount is tight, you are ready to attach your microphone of choice. For this article I am going to use a BEACN Mic but BEACN Mic Stand supports both 3/8&quot; and 5/8&quot; (via included thread adapter)</li><li>Screw the BEACN Mic onto the ball mount, tightening with the bottom collar<br><img src="https://attachments.gorgias.help/3dBwk7Wj4Ke2NZ9m/hc/eynJd7OKey79ERow/2024041619-58aef2e9-286f-4dca-b69c-370795239ee9-firstcollaradjustment.gif" style="width: 300px;" class="fr-fic fr-dib"></li><li>Adjust the direction of your BEACN Mic using the top collar<br><img src="https://attachments.gorgias.help/3dBwk7Wj4Ke2NZ9m/hc/eynJd7OKey79ERow/2024041619-472d01f6-3e46-43f1-af7c-8fa7ab1631f5-secondcollaradjustment.gif" style="width: 300px;" class="fr-fic fr-dib"></li><li>If you find the arm starts to sag after mounting the mic, use the adjustment tool to increase the tension on the second BEACN Mic Stand arm piece by turning the screw clockwise<br><img src="https://attachments.gorgias.help/3dBwk7Wj4Ke2NZ9m/hc/eynJd7OKey79ERow/2024041619-055f9565-07b2-47b0-bf23-7fa16a465ba4-14%20photos%20added%20(1).jpg" style="width: 300px;" class="fr-fic fr-dib"></li><li>Plug in your cable to your Microphone</li><li>Push the cable into the cable channel on the bottom of BEACN Mic Stand<br><img src="https://attachments.gorgias.help/3dBwk7Wj4Ke2NZ9m/hc/eynJd7OKey79ERow/2024041619-87aa9d21-9b3d-4e81-89da-721c5c1cd668-insertcableintoarm.gif" style="width: 300px;" class="fr-fic fr-dib"></li><li>Plug your cable into your computer or interface</li></ol></div></div><div class="accordion__item"><div class="accordion__item-title"><strong>Grommet mounting</strong></div><div class="accordion__item-content">The BEACN Mic Stand comes with an option to mount the arm directly to the desk. For this mounting option, the desk would need to either have a hole that is between 10-40mm, or you would need to drill a 3/8&quot; hole into your desk.<p><br></p><p><strong>Modifying the desk clamp for Grommet mounting</strong></p><ol class="list-colored"><li>Take a Phillips screwdriver, and poke it through the center hole on the top of the desk clamp<br><img src="https://attachments.gorgias.help/3dBwk7Wj4Ke2NZ9m/hc/eynJd7OKey79ERow/2024041620-decb4a15-2bb6-4af0-850c-55c75fc0c075-selected%20photo%20(5).jpg" style="width: 300px;" class="fr-fic fr-dib"></li><li>Remove the screw holding the bottom clamp in place</li><li>Remove the bottom clamp and unscrew the clamp tension screw from the clamp base<br><img src="https://attachments.gorgias.help/3dBwk7Wj4Ke2NZ9m/hc/eynJd7OKey79ERow/2024041620-0f12086f-32cc-41da-8b12-3e020ce5ba7c-selected%20photo%20(4).jpg" style="width: 300px;" class="fr-fic fr-dib"></li><li>Take the bottom clamp and drop it onto the clamp tension screw<br><img src="https://attachments.gorgias.help/3dBwk7Wj4Ke2NZ9m/hc/eynJd7OKey79ERow/2024041620-b635cd76-6ffb-48ea-a1d5-e64d952316fb-selected%20photo%20(1).jpg" style="width: 300px;" class="fr-fic fr-dib"></li><li>Attach the Mic Stand Base to the Grommet plate using the 3 M5x12 screws<br><img src="https://attachments.gorgias.help/3dBwk7Wj4Ke2NZ9m/hc/eynJd7OKey79ERow/2024041620-6ad1a2da-31fd-4ff2-801c-99fdb7ed15aa-selected%20photo%20(2).jpg" style="width: 300px;" class="fr-fic fr-dib"></li><li>Remove the white back off of the circular rubber foot and place the adhesion side over the screws, being careful to make sure the hole lines up<br><img src="https://attachments.gorgias.help/3dBwk7Wj4Ke2NZ9m/hc/eynJd7OKey79ERow/2024041620-88410d53-5d15-4c6f-ac25-184e87d63675-selected%20photo%20(3).jpg" style="width: 300px;" class="fr-fic fr-dib"></li><li>Remove the clear film off of the rubber foot</li><li>Place the Mic Arm base over the hole in your desk. If it is a 3/8&quot; hole you drilled make sure to line up the hole in the Mic Arm base with the drilled hole. If its a pre existing hole, make sure that the Mic Arm base is center</li><li>Take the clamp tension screw and screw it through the desk hole into the center hole on the Mic Arm base<br><img src="https://attachments.gorgias.help/3dBwk7Wj4Ke2NZ9m/hc/eynJd7OKey79ERow/2024041620-dd1bf9ce-9b9d-4565-83bd-2eed7082e821-selected%20photo17.jpg" style="width: 300px;" class="fr-fic fr-dib"></li><li>Proceed to tighten until the bottom clamp is tight to the desk</li></ol><p><strong>Finishing assembly</strong></p><ol class="list-colored"><li>Once the clamp is tightened, take the first piece of the BEACN Mic Stand arm piece and slide it into the desk mount. NOTE: BEACN Mic Stand come with a riser that you can use to bring the arm up higher, but it is not necessary<br>With riser:<img src="https://attachments.gorgias.help/3dBwk7Wj4Ke2NZ9m/hc/eynJd7OKey79ERow/2024041619-3b9e9a89-1f27-4288-977e-ad01a269afd2-14%20photos%20added%20(5).jpg" style="width: 300px;" class="fr-fic fr-dib"><br>Without riser:<img src="https://attachments.gorgias.help/3dBwk7Wj4Ke2NZ9m/hc/eynJd7OKey79ERow/2024041619-d5a332b1-3a8f-457b-a549-dac6051b01e8-14%20photos%20added%20(2).jpg" style="width: 300px;" class="fr-fic fr-dib"></li><li>Take the second BEACN Mic Stand arm piece and slide it into the first BEACN Mic Stand arm piece</li><li>Using the adjustment tool, tighten the screws on the desk mount and the first BEACN Mic Stand arm piece to adjust how freely you want the BEACN Mic Stand to move around<br><img src="https://attachments.gorgias.help/3dBwk7Wj4Ke2NZ9m/hc/eynJd7OKey79ERow/2024041619-8e214a60-7088-46ef-838e-0028390472b1-14%20photos%20added%20(4).jpg" style="width: 300px;" class="fr-fic fr-dib"><img src="https://attachments.gorgias.help/3dBwk7Wj4Ke2NZ9m/hc/eynJd7OKey79ERow/2024041619-6e857109-e9b7-4952-baa4-ea5c66b3d481-14%20photos%20added%20(8).jpg" style="width: 300px;" class="fr-fic fr-dib"></li><li>Take the ball mount out of the BEACN Mic Stand Box<br><img src="https://attachments.gorgias.help/3dBwk7Wj4Ke2NZ9m/hc/eynJd7OKey79ERow/2024041619-9c44abeb-2a4a-49c1-8500-9533c18e73d4-14%20photos%20added%20(7).jpg" style="width: 300px;" class="fr-fic fr-dib"></li><li>Loosen the ball mount and slide it on over the BEACN Mic Stand end<br><img src="https://attachments.gorgias.help/3dBwk7Wj4Ke2NZ9m/hc/eynJd7OKey79ERow/2024041619-1102037c-1400-45a2-857b-1e011fe077a7-slideballmounton.gif" style="width: 300px;" class="fr-fic fr-dib"></li><li>Tighten the ball mount<br><img src="https://attachments.gorgias.help/3dBwk7Wj4Ke2NZ9m/hc/eynJd7OKey79ERow/2024041619-cc470a95-1532-4a15-a049-d9c79221caa5-tightenballmount.gif" style="width: 300px;" class="fr-fic fr-dib"></li><li>Once the ball mount is tight, you are ready to attach your microphone of choice. For this article I am going to use a BEACN Mic but BEACN Mic Stand supports both 3/8&quot; and 5/8&quot; (via included thread adapter)</li><li>Screw the BEACN Mic onto the ball mount, tightening with the bottom collar<br><img src="https://attachments.gorgias.help/3dBwk7Wj4Ke2NZ9m/hc/eynJd7OKey79ERow/2024041619-58aef2e9-286f-4dca-b69c-370795239ee9-firstcollaradjustment.gif" style="width: 300px;" class="fr-fic fr-dib"></li><li>Adjust the direction of your BEACN Mic using the top collar<br><img src="https://attachments.gorgias.help/3dBwk7Wj4Ke2NZ9m/hc/eynJd7OKey79ERow/2024041619-472d01f6-3e46-43f1-af7c-8fa7ab1631f5-secondcollaradjustment.gif" style="width: 300px;" class="fr-fic fr-dib"></li><li>If you find the arm starts to sag after mounting the mic, use the adjustment tool to increase the tension on the second BEACN Mic Stand arm piece by turning the screw clockwise<br><img src="https://attachments.gorgias.help/3dBwk7Wj4Ke2NZ9m/hc/eynJd7OKey79ERow/2024041619-055f9565-07b2-47b0-bf23-7fa16a465ba4-14%20photos%20added%20(1).jpg" style="width: 300px;" class="fr-fic fr-dib"></li><li>Plug in your cable to your Microphone</li><li>Push the cable into the cable channel on the bottom of BEACN Mic Stand<br><img src="https://attachments.gorgias.help/3dBwk7Wj4Ke2NZ9m/hc/eynJd7OKey79ERow/2024041619-87aa9d21-9b3d-4e81-89da-721c5c1cd668-insertcableintoarm.gif" style="width: 300px;" class="fr-fic fr-dib"></li><li>Plug your cable into your computer or interface</li></ol></div></div></div>

Setting up BEACN Mic Stand

BEACN

Get to know your desktop microphone boom arm

Getting Started with BEACN Mic Stand

BEACN Mic Stand | Knowledge Base

BEACN Mic Setup Guide

What are the question mark icons in the BEACN Mic EQ tab?

Understanding the Noise Suppression on BEACN Mic

Understanding the Expander on BEACN Mic

How do I set the Expander to avoid keyboard clicks?

Understanding the Compressor on BEACN Mic

Understanding the De-esser on BEACN Mic

How to use the exciter on BEACN Mic

How to use the Headphone EQ on BEACN Mic

How to change amp power modes on BEACN Mic.

How do I make the ring show up on camera and look good?

How to add/remove faders on BEACN Mic's Mixing Suite?

How to reorder faders on BEACN Mic's Mixing Suite

Using your Audience Mix to set volumes for your audience on BEACN Mic

How to rename an application on BEACN Mic's Mixing Suite

What is the "On Device" profile that keeps showing up when BEACN Mic is connected?

How do I setup OBS/Streamlabs Desktop/Stream Elements OBS with BEACN Mic Advanced Mixing?

How to adjust the dual collar adjustment on BEACN Mic

How do I mount BEACN Mic on a boom stand?

Getting Started with BEACN Mic

Can I connect more than one BEACN Mic to my PC?

Why does the LED ring on BEACN Mic not change color when muting with BEACN Mix Create?

Why does my app bounce back to the previous device when routing with drag and drop?

People hear pops in my microphone. What's wrong?

I got a "Device improperly installed" warning!

Troubleshooting BEACN Mic

How to remove and replace the BEACN Mic Foam Windscreen

ADVANCED MIXING FOR BEACN MIC

Does BEACN Mic meet compliance regulations?

What comes in the box for BEACN Mic?

Refurbished Product FAQ

BEACN Mic | Knowledge Base

Is BEACN Studio compatible with Mac computers?

BEACN Studio Setup Guide

How to set your Mic Gain on BEACN Studio

What are the question mark icons in the BEACN Studio EQ tab?

Understanding the Noise Suppression on BEACN Studio

Understanding the Expander on BEACN Studio

How do I set the Expander on BEACN Studio to avoid keyboard clicks?

Understanding the Compressor on BEACN Studio

Understanding the De-esser on BEACN Studio

How to use the test recording feature of BEACN Studio

How to use the Headphone EQ on BEACN Studio

How to change amp power modes on BEACN Studio

How do I mute my microphone on BEACN Studio?

How to add/remove faders on BEACN Studio's Mixing Suite?

How to reorder faders on BEACN Studio's Mixing Suite

Using your Audience Mix to set volumes for your audience on BEACN Studio

How to rename an application on BEACN Studio's Mixing Suite

How do I setup OBS/Streamlabs Desktop/Stream Elements OBS with BEACN Studio Advanced Mixing?

How to setup your Playstation 5 with BEACN Studio

Setting up BEACN Studio in a Dual PC Setup (Gaming PC)

Getting Started with BEACN Studio

EQ Basics - Band, Frequency, Gain & Q

EQ Tips - How to Perform a Frequency Sweep

EQ Tips - How to use Bass Enhance

EQ Tips - How to use the Exciter

EQ Tips, Tricks and Guides for BEACN Studio

Why does the LED ring on BEACN Studio not change color when muting with BEACN Mix Create?

Why can I not hear the microphone test recording in the Mic EQ section of BEACN Studio?

Troubleshooting BEACN Studio

What comes in the box for BEACN Studio?

BEACN Studio | Knowledge Base

BEACN Mix Create Setup Guide

How to select a Microphone as your Mic output in BEACN App

How to change the name of your BEACN Device in the BEACN App

Setting your Default Devices using the BEACN App

Does BEACN Mix Create work without the BEACN app running?

Why are there several new USB audio devices on my system?

Getting Started with BEACN Mix Create

How to add/remove knobs on BEACN Mix Create

How to reorder knobs on BEACN Mix Create

What is knob paging?

Assigning Apps in BEACN Software

How to rename an application on BEACN Mix Create

Can I rename the knobs on BEACN Mix Create?

Can I control each program assigned to a knob independently?

Is it possible to change the volume level of a browser tab independently?

Knobs & Apps with BEACN Mix Create

Can I change what the buttons below the knobs do?

How to change the color of the buttons under the knobs on BEACN Mix Create

What is a "mute mode" and how do I set it up?

Can I reassign the submix button?

Buttons & Mute with BEACN Mix Create

Understanding and using the routing table on BEACN Mix Create

What is a submix?

How to toggle the personal mix on BEACN Mix Create?

Using your Audience Mix to set volumes for your audience on BEACN Mix Create

How do I setup OBS/Streamlabs Desktop/Stream Elements OBS with BEACN Mix Create?

Setting up BEACN Products in a Dual PC Setup

Mixing, Routing & Streaming with BEACN Mix Create

Does BEACN Mix Create have themes?

Does BEACN Mix Create meet compliance regulations?

Why do I have static/crackle on BEACN Mix Create when adding my microphone interface?

How to set your Default Audio Devices (Windows) with BEACN Mixing Suite

Troubleshooting BEACN Mix Create

BEACN Mix Create | Knowledge Base

BEACN Mix Setup Guide

Does BEACN Mix support submixes?

Does BEACN Mix support knob paging?

How to toggle the personal mix on BEACN Mix?

How to rename an application on BEACN Mix

Does BEACN Mix work without the BEACN app running?

Getting Started with BEACN Mix

Why can't I mute the personal mix using the hardware knob on BEACN Mix?

Why am I unable to re-add my playback device after removing it on BEACN Mix?

Troubleshooting BEACN Mix

Does BEACN Mix have themes?

Does BEACN Mix meet compliance regulations?

BEACN Mix | Knowledge Base

What threads does BEACN Mic Stand support?

What comes in the BEACN Mic Stand box?

How much weight can BEACN Mic Stand hold?

How big of a desk can BEACN Mic Stand fit on?

Can I cancel my order?

Does BEACN ship to my country?

How do I get back in stock alerts for BEACN products?

Shipping FAQ

Can BEACN provide an invoice for my purchase?

Can I order to a US PO Box or Military address?

Where can I buy BEACN products?

Does BEACN Price Match?

Holiday Shipping FAQ

BEACN Order and Shipping Support

What is your return policy?

How do I request a refund?

Refunds and Returns with BEACN

How do I find the BEACN App Version and Firmware Version?

How do I make the BEACN App startup in the System Tray?

Why did my Windows Default Audio Devices change?

How to find and restart the Windows audio endpoint builder to fix slow device enumeration