What are the voice prompts on BEACN Headset?Updated 18 hours ago
What are the voice prompts on BEACN Headset?
BEACN Headset talks to you so you don’t need to look at a screen. Here is what each voice prompt means and when you’ll hear it.
Battery and charging
| You hear | When |
|---|---|
| The battery level, in 10% steps | You click the power button once, or a few seconds after you plug in the USB cable. |
| Battery full | The battery is at the top and charging has really finished. While still charging near the top you hear 90% instead. |
| Battery critically low | The battery is below 10%. |
| Battery charging | You plug in the USB cable. The battery level follows. |
| USB connected | You plug the USB cable into a computer, before "battery charging". |
Mic
| You hear | When |
|---|---|
| Mic muted / mic unmuted | You click the mute button. |
| Mic disconnected | You unplug the boom mic. The mic is muted, and you hear this even if it was already muted. |
The wheel
| You hear | When |
|---|---|
| The mode name: Volume, Subwoofer, Chat/Game or Mic Monitor (Mic Monitor only with the boom mic plugged in) | You hold the mute button to change what the wheel controls. |
| The Subwoofer level, in 10% steps | About a second after you stop turning the wheel in Subwoofer mode. |
| A short up or down sound | Each step of the wheel in Mic Monitor mode. |
| Minimum / maximum | You reach either end in Subwoofer or Mic Monitor mode. |
| The game or chat end | You reach either end of the Chat/Game mix. |
| Balanced | You turn the Chat/Game mix through the middle. |
See Using the wheel: Volume, Subwoofer, Chat/Game mix and Mic Monitor.
Power
When you plug in the USB cable while the headset is off, it turns on quietly, without its usual power-on sound, and tells you it’s charging instead. See Turning your BEACN Headset on and off.